Differences

This shows you the differences between two versions of the page.

--- tiltaudio:v3.5_3.7:assembly [2021/11/10 08:16] – charlie
+++ tiltaudio:v3.5_3.7:assembly [2021/11/10 08:22] (current) – charlie
@@ Line 13: / Line 13: @@
 {{:tiltaudio:v3.5:tilt_3.5_assembled_notations.jpg?direct&400|}}
-These are the PCM5102 pins that need to be connected:
+**V3.7**
-{{:tiltaudio:v3.5:tilt_3.5_dac.jpg?direct&400|}}
+There were only a few minor changes that I made in 3.7. I added a second WPC95 header to get rid of the weird cable requirement, and then added a spot to rotate the OLED display for in DE machines. The other thing I added (and what I consider more important) are notation in the silk screen to aid in assembly. There are white boxes over the power header sections where the pin should be removed, there are little boxes to denote where the cable header notch should go, and for the PCM5102 I added a few to mark which pins needed to be connected. See the picture below.
+{{:tiltaudio:v3.5_3.7:tilt_audio_3.7.jpg?direct&400|}}